ENGINE SAVER®   

New Combined Temperature & Low Coolant Alarm

Now you can have both features:

Low Coolant and Over Temperature in the one tiny epoxy sealed unit, with both audible & visual Alarms

Simple tactile, one knob adjustment, you don't have to be a VCR programmer to adjust this unit on the run.

Self tests on every start up and alerts the driver with a short beep of the buzzer and a flash of the coolant led.

Set to running temperature and you are all set.

If the engine momentarily gets hotter due to extra load, simply turn the knob clockwise a bit and then reset later

Easy!

  Temperature sensor fitting is simple, just mount it under a bolt on the cylinder head.

The full range of Engine Saver® Coolant Sensors are available as usual.

Temperature alarm setting is adjustable through the whole range of normal engine running temperatures.

The electronic module is solidly filled with epoxy to protect for life against moisture and vibration.

Small size makes module fitting really easy      Just secure in place with double sided tape.

The cables run easily between the steering column shroud and dash, with no holes needing to be drilled, no ugly brackets to fit.

CLICK HERE TO VISIT THE ORDER PAGE

 ALSO AVAILABLE FROM ENGINESAVER UK®

---------------------------------------------------------------------------------------------------------------------------------------------------------------------